Properties for Design of Composite Structures. Neil McCartney
Читать онлайн книгу.
target="_blank" rel="nofollow" href="#fb3_img_img_a4a1f33d-ccf3-5aa7-8e5d-63ee40fbdc81.png" alt="upper V Subscript p Baseline equals n a cubed slash b cubed equals 1 minus upper V Subscript m Baseline period"/>(3.2)
Whatever the nature and arrangement of spherical particles in the cluster, Maxwell’s methodology considers the far-field when replacing the isotropic discrete particulate composite shown in Figure 3.1(a), that can just be enclosed by a sphere of radius b, by a homogeneous effective composite sphere of the same radius b embedded in the matrix as shown in Figure 3.1(b). There is no restriction on sizes, properties and locations of particles except that the equivalent effective medium is homogeneous and isotropic. Composites having statistical distributions of both size and properties can clearly be analysed.
3.2.2 Temperature Distribution for an Isolated Sphere Embedded in an Infinite Matrix
A set of spherical polar coordinates (r,θ,ϕ) is introduced having origin at the centre of the sphere of radius a. For steady-state conditions, the temperature distribution T(r,θ,ϕ) in the particle and surrounding matrix must satisfy Laplace’s equation, which is expressed in terms of spherical polar coordinates for the case where the temperature is independent of ϕ, namely,
On the external boundary r→∞ a temperature distribution is imposed that would lead, in a homogeneous matrix material under steady-state conditions, to the following linear temperature distribution having a uniform gradient α
At the particle/matrix interface r = a, the following conditions are imposed
where both the temperature and the normal heat flux are assumed to be continuous across the interface, and where the isotropic thermal conductivities of particles and matrix are denoted by κpandκm, respectively. The temperature distribution T(r,θ) in the particle and matrix, satisfying (3.3), the condition at infinity and the interface conditions (3.5), is given by
As x3=rcosθ, the temperature gradient is uniform within the particle. Any temperature T0 can be added to (3.6) without affecting the satisfaction of the interface conditions (3.5). As an infinite medium having a uniform temperature gradient is considered, it is inevitable that temperatures lower than absolute zero will be encountered. This physical absurdity can be avoided by assuming that the system is taken as a spherical region having a very large but finite radius, in which case T0 would be chosen large enough to ensure that the absolute temperature distribution is everywhere positive.
3.2.3 Maxwell’s Methodology for Estimating Conductivity
The first step of Maxwell’s approach considers the effect of embedding in the infinite isotropic matrix, an isolated cluster of isotropic spherical particles of different types that can be just contained within a sphere of radius b, as illustrated in Figure 3.1(a). The isotropic thermal conductivity of particles of type i is denoted by κp(i). The cluster is assumed to be effectively homogeneous regarding the distribution of particles, leading to an isotropic effective thermal conductivity κeff for the composite lying within the sphere of radius b. For a single particle, the matrix temperature distribution is perturbed from the distribution (3.4) to the distribution (3.6) that depends on particle geometry and properties. The perturbing effect in the matrix at large distances from the cluster of particles is estimated by superimposing the perturbations caused by each spherical particle, regarded as being isolated. The second step recognises that, at very large distances from the cluster, all the particles can be considered located at the origin that is chosen to be situated at the centre of one of the particles in the cluster. Thus, for the case of multiple phases, the approximate temperature distribution in the matrix at large distances from the cluster is given by the following generalisation of the second of relations (3.6):
On using (3.1), this relation may be expressed in terms of the volume fractions so that
The third step involves replacing the composite having discrete particles lying within the sphere of radius b by a homogeneous spherical isotropic effective medium (see Figure 3.1(b)) having radius b and having the isotropic effective thermal conductivity κeff of the composite. On using (3.6), the temperature distribution in the matrix outside the sphere of effective medium having radius b is then given exactly, for a given value of κeff, by