Geophysical Monitoring for Geologic Carbon Storage. Группа авторов

Читать онлайн книгу.

Geophysical Monitoring for Geologic Carbon Storage - Группа авторов


Скачать книгу
Monitoring

       Ting Chen and Lianjie Huang

       Geophysics Group, Los Alamos National Laboratory, Los Alamos, New Mexico, USA

      ABSTRACT

      Microseismic monitoring can play a crucial role to ensure safe long‐term geological carbon storage. For reliable long‐term monitoring for CO2‐injection‐induced microseismic events, both a surface seismic array and a borehole geophone array are desired. Optimal design of the seismic network is of great interest to achieve cost‐effective monitoring. We develop a methodology to determine the optimal number of seismic stations with a geometrically satisfactory distribution for given monitoring regions. We design an optimal microseismic monitoring network based on widely accepted guiding principles, and the relationship between the location accuracy of microseismic events and the total number of seismic stations. We determine the optimal number of seismic stations based on the trade‐off curve of the event location accuracy versus the total number of seismic stations. We demonstrate our optimal design method using models from the Kimberlina carbon storage site in California, USA.

      The injection of CO2 into subsurface reservoirs during geological carbon storage changes the stress state of the subsurface through volume and/or mass change, and reduces the effective normal stress by increasing the pore pressure (Ellsworth, 2013). Such changes in stress can induce sudden slip on fractures or faults under certain conditions, generating microseismic events near the target CO2 storage regions. Induced microseismicity associated with the injection of CO2 may cause possible leakage of CO2 or brine from reservoirs along faults, leading to contamination of shallow aquifers. Relatively large induced seismic events may also create public concerns. Microseismic monitoring can play a crucial role to ensure safe long‐term geological carbon storage. Monitoring of induced microseismicity during and after injection operations can help map the movement of CO2, understand the stress changes in the reservoir, and identify faults and possible leakage pathways (e.g., Maxwell & Urbancic, 2001; Miyazawa et al., 2008; Verdon et al., 2010).

      The guidelines we follow to design the seismic network distribution are some widely accepted guiding principles based on practical experience and have been provided theoretical basis by some studies (e.g., Chatelain et al., 1980; Kissling, 1988; Gomberg et al., 1990; Rabinowitz & Steinberg, 1990; Husen et al., 2003). Based on these rules, an epicenter can be best located when stations surround it with good azimuthal coverage. A range of station distances is desirable, and the existence of at least one station with small epicentral distance, preferably within about one focal depth, is especially useful for depth determination. The inclusion of S‐wave arrival times besides P‐wave arrival times can improve the hypocenter determination, particularly the depth.

      The U.S. Department of Energy (DOE) established the National Risk Assessment Partnership (NRAP) project to develop quantitative risk assessment methodologies for carbon capture, utilization, and storage (CCUS). As part of this initiative, the Kimberlina site in California was proposed as a potential demonstration site. We use the Kimberlina model to demonstrate the application of our optimal design of both surface seismic network and borehole geophone array for microseismic monitoring.

Schematic illustration of the procedure for optimal design of seismic network for microseismic monitoring.

      1 Build a velocity model for a field site based on site characterization. The velocity model should be based on previous geology and geophysics studies in this region. When an accurate S‐wave velocity model is not available, the common practice is to assume a constant ratio of V P/V S where V P is the P‐wave velocity and V S is the S‐wave velocity.

      2 Define target monitoring regions and generate synthetic microseismic events within target monitoring regions. The target monitoring regions where microseismic events would occur depend on the injection locations, the reservoir depth, and the surrounding geology. The fault that is the closest to the injection site is often of great interest for monitoring. Synthetic true locations of microseismic events may be within reservoirs and/or on faults.

      3 Define the distribution region of seismic stations. The range of the area where seismic stations may be distributed depends on the locations and magnitudes of potential microseismic events.

      4 Determine the event locations for a given seismic network. First, we calculate the synthetic travel times for P‐waves and S‐waves for all seismic stations using the true locations of microseismic events and the P‐wave and S‐wave velocity models. We add random noise to the calculated travel times, and then use these travel times to solve for the event locations assuming we know the velocity models.

      5 Repeat Step 4 for all possible seismic networks. Networks with different seismic stations can be created by varying the spacing of seismic stations.

      6 Analyze the relationship between the event location accuracy and the number of seismic stations. The optimal seismic network corresponds to the distribution with the best trade‐off between the event location and the number of seismic stations (or cost).

      We demonstrate how to employ these procedures to design an optimal microseismic monitoring network using a synthetic model for the Kimberlina site in California.

      4.3.1. Models for the Kimberlina Site


Скачать книгу