CarTech®, Inc.

      39966 Grand Avenue

      North Branch, MN 55056

      Phone: 651-277-1200 or 800-551-4754

      Fax: 651-277-1203

       www.cartechbooks.com

      © 2015 by George Reid

      All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without prior permission from the Publisher. All text, photographs, and artwork are the property of the Author unless otherwise noted or credited.

      The information in this work is true and complete to the best of our knowledge. However, all information is presented without any guarantee on the part of the Author or Publisher, who also disclaim any liability incurred in connection with the use of the information and any implied warranties of merchantability or fitness for a particular purpose. Readers are responsible for taking suitable and appropriate safety measures when performing any of the operations or activities described in this work.

      All trademarks, trade names, model names and numbers, and other product designations referred to herein are the property of their respective owners and are used solely for identification purposes. This work is a publication of CarTech, Inc., and has not been licensed, approved, sponsored, or endorsed by any other person or entity. The Publisher is not associated with any product, service, or vendor mentioned in this book, and does not endorse the products or services of any vendor mentioned in this book.

      Edit by Bob Wilson

      Layout by Monica Seiberlich

      ISBN 978-1-61325-279-6

      Item No. SA339

      Library of Congress Cataloging-in-Publication Data Available

      Written, edited, and designed in the U.S.A.

      10 9 8 7 6 5 4 3 2 1

       Title Page:

       Ford’s 1965 289 High Performance V-8 yielding 271 hp at 6,000 rpm was unavailable with automatic transmission until 1966. Most were fitted with the cast-iron Ford Top Loader 4-speed transmission.

       Back Cover Photos

       Top:

       This is the Mexican block’s wider 15/16-inch main cap, which closely resembled the 289 High Performance main cap. Mexican blocks received wider main caps for durability in unimproved road conditions.

       Middle

       The three-bolt harmonic dampener (left) was used prior to 1970. Beginning in 1970, Ford went to a four-bolt dampener (right) on all V-8 engines. Small-block balancers vary in width and markings depending on the engine they’re intended for. Beginning in December 1982, the 28-ounce offset balance was changed to 50 ounces to accommodate greater reciprocating weight in the 5.0L High Output engine.

       Bottom Left:

       A closer look at the 1975 351W head casting shows the “WCP” and “351” markings. When shopping for 351W cylinder heads, it is important to focus on 1969–1974 castings with the 60-cc chamber and 1.840/1.540-inch valves. By 1978, the 351W head was nothing more than a 302 casting with smaller 1.780/1.450-inch valves. A popular misconception is that the 351W head has larger ports; however, port sizing is actually the same as the 289/302’s. Only the valves are larger through 1977.

       Bottom Right:

       The venerable Autolite 4100 4-barrel carburetor was produced from 1957 to 1966. Like its 2100 2-V corporate sibling, the 4100 is a simple atomizer you can pop the air horn off of right on top of the engine. The 4100 was fitted with an exhaust heat-sensitive automatic choke as on the 2100. The 289 High Performance 4100 had an automatic choke until 1964 when Ford went to a manual choke for easier cold starting.

      OVERSEAS DISTRIBUTION BY:

      PGUK

      63 Hatton Garden

      London EC1N 8LE, England

      Phone: 020 7061 1980 • Fax: 020 7242 3725

       www.pguk.co.uk

      Renniks Publications Ltd.

      3/37-39 Green Street

      Banksmeadow, NSW 2109, Australia

      Phone: 2 9695 7055 • Fax: 2 9695 7355

       www.renniks.com

      CONTENTS