Environmental and Agricultural Microbiology. Группа авторов
Читать онлайн книгу.
obtain high Mw PLA without the chain extenders’ addition."/>
Figure 4.5 (a) Conventional polymerization of polylactic acid, (b) High Mw PLA preparation through catalytic lactide formation method (c) The third route involves azeotropic dehydrated condensation of lactic acid to obtain high Mw PLA without the chain extenders’ addition.
4.3.3 Biodegradability of Polylactic Acid
PLA attains researchers’ keen attention among all the biodegradable plastics due to its complete application in the agriculture and packaging industry, as PLA films are mechanically stable and biodegradable. Biodegradation of PLA occurs in the following two pathways: (a) Fragmentation of the polymer leading chains occurs via hydrolysis in the presence of acidic or basic conditions. Moisture plays a vital role in lowering Mn values below 40000, (b) followed by bio-assimilation of disintegrated oligomers by environmental microorganisms to carbon dioxide, water, etc. Biodegradability depends on the chemical structure as well as the polymer sources. Proteinase K was a widely used microorganism for PLA bio-degradation [23]. However, they are able to degrade oligomer products or lactic acids but not PLA itself. Degradability can be controlled in various synthetic ways, and a few popular methods are discussed as follows.
4.3.4 Copolymerization Method
The degree of crystallization is directly connected to the rate of bio-degradability and amorphous copolymers between L-lactide and glycolic acid monomers. The prepared poly(lactide-co-glycolide) shows faster degradation than PLA, and increasing glycolide contribution rate further increases [24]. Grafting copolymerization between L-lactide into chitosan (high content) using a tin catalyst increases the thermal stability and degradability rate [25].
4.3.5 Blending Method
Biodegradability rate can be increased in the blending method in between PLA and lactic acid (0%–5% of lactic acid content), and the changes were observed in chemical or physical properties. Lactate is an available substrate for different bacterial species to facilitate PLA degradation by providing carbon and energy source [26].
4.3.6 Nanocomposite Formation
PLA nanocomposites with montmorillonites (nanoclay) can enhance the degradation rate because hydroxyl groups belonging to the silicate layers facilitate the hydrolysis process. Nanoclays’ effect on PLA biodegradability is enhanced by their excellent dispersion over the polymer surface and depending upon their chemical structures and affinity toward bacterium [27].
4.3.7 Summary
Along with conventional uses, exciting PLA or its stereocomplex PLA applications are possible due to its favorable mechanical properties, tunable degradation rates, and high biocompatibility. These specific properties are possible with its copolymer such as Poly(lactic-co-glycolic acid) (PLGA) and which can be further utilized in periodontal regenerative medicine.
4.4 Polyhydroxyalkanoates
Definition
PHAs are the family of bio-polyesters and are among well-known biodegradable plastics and well recognized as entirely biosynthetic and biodegradable with almost zero toxic waste be recycled into organic waste [30–32]. PHAs act as microbial reserve compounds for energy [33] and carbon [34] and hold a great potential to replace the petroleum-based compounds in the plastic market are termed as “green plastics” [35]. They show a wide range of properties that can be accessed biosynthetically by selected prokaryotes, and this opens the potential market for substituting petroleum-based products such as elastomers, thermoplastics by PHAs.
Rising concern for greenhouse gas emissions facilitates bio-based materials and promotes the PHA market in the future. PHAs commercial use increased from an estimated value of 10,000 metric tons (MT) to 34,000 MT in 2018, with a CAGR of 27.7% [36]. PHA biopolymer is expensive as compared to PP and PE. This high price is due to the high purity of substrates such as glucose, its production in various batches, and a large amount of solvents [2]. With the increasing availability of renewable raw material and increasing demand to use biodegradable polymers for bio-medical use and food, applications are beneficial to the PHA market, and its market is expected to US$93.5 million by 2021 from US$73.6 million in 2016.
Figure 4.6 Structure of polyhydroxyalkanoates (x = number of methylene groups in the backbone; n = 1000-10000; R = alkyl groups, C1-C13).
4.4.1 Biosynthesis of Polyhydroxyalkanoates
PHA (Figure 4.6) biosynthesis begins from the feedstocks like hexoses, pentoses, lactose, maltose, lipids, alcohols, organic acids, or gases like carbon dioxide or methane under undesirable growth conditions due to imbalanced nutrient supply [2, 3]. PHAs are unique among biopolymer families whose production and degradation depend on the living cells. Hydroxyl groups of PHAs are produced in recombinant Escherichia coli JM109 in the presence of glycolate as the only carbon source. The propionate-CoA transferase (pct) gene from Megasphaera elsdenii and the β-ketothiolase (bktB) gene and phaCAB operon from Ralstonia eutropha H16 were introduced into E. coli JM109. Another alternative and convenient synthetic approach to synthesize PHAs is a chemical method that utilizes a ring-opening polymerization mechanism of β-lactones, including anionic, coordination-insertion, organo-catalyzed, enzymatic, and cationic processes.
In addition to PHA’s biosynthesis, an alternative and convenient synthetic approach to obtain PHAs is via the ring-opening polymerization (ROP) of β-lactones, including anionic, “coordination-insertion,” organo-catalyzed, enzymatic, and cationic processes.
4.4.2 Application of PHAs
PHAs can be used in various applications [37], such as
- Packaging films for foods, containers, and bags.
- Precursors for different chiral compounds.
- Act as a probe for drug delivery, herbicides, and insecticides.
- Disposable products like utensils, diapers, cups, etc.
- Medical applications such as surgical pins, staples, swabs, and wound dressings.
4.4.3 Biodegradability of PHAs
Biodegradation can be defined as the breaking down material when exposed to bacteria, fungi, or by other biological means, whether anaerobically or aerobically [38]. It can also be stated that the polymer degradation in biological space via enzymatic and non-enzymatic hydrolysis and not via thermal oxidation, radiolysis, or photolysis. The remarkable ability of PHAs to degrade biologically has made it an interesting and promising material for various applications [2, 3]. Increasing amounts of chemical waste pose a significant threat to the biosphere and damage the environment to a greater extent. So, it is a great matter of concern for the environment and materials having biospheric cycling are becoming important these days. PHAs are one of the polymeric materials synthesized by microorganisms under particular growth conditions and find a special place as biodegradable natural polyesters in the biosphere recycling [2, 3]. Biodegradation of PHAs is accelerated by microorganisms that reside in a specific natural environment such as soil. In this natural environment, PHA has the most