---

Скачать книгу

---

8/7/83 Opacity 60.273a Kraft pulp mills BB Recovery furnace Lime kiln Digester Brown stock washer Evaporator:oxidation andstripper system 9/24/76 Opacity, TRS^e 60.284 Glass manufacturing plants CC Glass melting furnace 6/15/79 Opacity 60.293 Stationary gas turbines GG 10 MBtu Constructed between 10/3/77 to 7/8/04 Option: NO_x, O₂/CO₂ 60.334 Lime manufacturing facilities HH Rotary lime kiln 5/3/77 Opacity, or scrubber Δp & supply P 60.343 Phosphate rock plants NN Dryer and calciner grinder 9/21/79 Opacity Opacity 60.403 Tire manufacturing industry BBB 1/20/83 VOC^d 60.544 Polymer industry DDD Carbon adsorbers Constructed between 9/30/87 – 11/10/89 VOC^d 60.563 Flexible vinyl and urethane coating and printing FFF Solvent recovery controls Exhaust hoods 1/18/83 VOC^d 60.584 Synthetic Organic Chemical Manufacturing Industry (SOCMI) III Air oxidation process controls Absorbers, condensers, carbon adsorbers 10/21/83 VOC^d 69.615 60.613 Onshore natural gas processing LLL Sweetening units Constructed between 1/20/84 and 8/23/11 TRS, SO₂ Velocity 60.646 SOCMI NNN Distillation operations 12/30/83 VOC^d 60.663 Nonmetallic mineral processing plants OOO Baghouses 4/22/08 Particulate Matter 60.674 Petroleum refinery wastewater systems QQQ Carbon adsorbers 5/4/87 VOC 60.694 60.695 SOCMI reactor processes RRR Absorbers Condensers Adsorbers 6/29/90 VOC^d 60.703 Magnetic tape coating SSS Carbon adsorbers 1/22/86 VOC^d 60.714 Mineral industries UUU Calciners and dryers 4/23/86 Opacity 60.734 Polymeric coating VVV Carbon adsorbers 4/30/87 VOC^d 60.774

      ^a NSPS applies if construction commenced after this date.

      ^b NSPS applies if modification or reconstruction commenced after this date.

      ^c CEM requirements are as applicable when meeting the conditions of the subpart.

      ^d Rule applies if constructed before this date

      ^e Organic monitoring device based on IP, photoionization, or thermal conductivity.

      Not listed in the table are operational units or smaller sources that instead of installing CEM systems may alternatively be required to monitor process parameters such as pressure drops, temperatures, or fuel flow rates. Regulatory relief is applied to smaller sources where it can be a burden to purchase, operate, and maintain a CEM system. Here, the less stringent parameter monitoring requirements for low‐emitting sources may not be especially significant when considering their relatively smaller contribution to the atmospheric pollution burden.

      The subparts tend to be complex. Accordingly, they should be referred to for detailed information concerning units of the emissions standards, monitoring requirements, reporting requirements, and exceptions.

       General Provisions for the NSPS Subparts

      General provisions pertinent to CEM systems required for sources regulated under the NSPS subparts are present in four sections of Part 60 of the Code. These sections are as follows:

       §60.7 Notification and Recordkeeping

       §60.8 Performance Tests

       §60.11 Compliance with Standards and Maintenance Requirements

       §60.13 Monitoring Requirements

      Each of these sections gives important requirements regarding the opacity and gas monitoring systems mandated for source categories addressed by the subparts. These should be read in tandem with the subparts. For example, §60.7 gives requirements for Part 60 sources with installed CEM systems to submit excess emission reports and describes the information that is to be included in the report. In §60.8, requirements are given for conducting performance tests to determine whether the facility is within its compliance limits. Here, the performance tests conducted are those reference test methods of 40 CFR 60

---

Скачать книгу