Properties for Design of Composite Structures. Neil McCartney
Читать онлайн книгу.
left-parenthesis StartFraction partial-differential u Subscript k Baseline Over partial-differential x Subscript l Baseline EndFraction plus StartFraction partial-differential u Subscript l Baseline Over partial-differential x Subscript k Baseline EndFraction right-parenthesis equals epsilon Subscript l k Baseline period"/>(2.143)
With the assumption that the strain field is uniform in the composite, the displacement field is linear and may be written in the form
where it is assumed that the displacement vector is zero when x1=x2=x3=0.
The local equation of state (2.111) is not of a form that can easily be related to experimental measurements as one of the state variables is assumed to be the specific entropy η. It is much more convenient, and much more practically useful, if the state variable η is replaced by the absolute temperature T. A local equation of state for the specific Helmoltz energy is assumed to have the following form (equivalent to (2.111) as implied by (2.67)–(2.69))
where εij is the infinitesimal strain tensor introduced in Section 2.12 (see (2.107)). For infinitesimal deformations, and because ψ≡υ−Tη from (2.64), the following differential form of (2.145) may be derived from (2.112)
where the specific entropy η and the stress tensor σij are now defined by
For infinitesimal deformations, a linear thermoelastic response can be assumed so that the Helmholtz energy per unit volume ρ0ψ^ has the form
where Cijkl are the elastic constants having the dimensions of stress or modulus, βij are thermoelastic coefficients and where T0 is a reference temperature. As the strain tensor is symmetric, it follows that βij=βji and that
On substituting (2.148) into (2.147), it follows that
It should be noted that the stress components are zero everywhere when the strain is defined to be zero everywhere at the reference temperature T0.
The inverse form of the linear stress-strain relations (2.153) is written as
where the compliance tensor Sijkl is such that
where use has been made of (2.15), and where
are anisotropic thermal expansion coefficients.
2.14.1 Isotropic Materials
The situation simplifies when the material is linear thermoelastic and isotropic so that the stress-strain relations are
where E is Young’s modulus, ν is Poisson’s ratio, α