Engineering Solutions for CO2 Conversion. Группа авторов
Читать онлайн книгу.
J.N., Bade, O.M., Askestad, I. et al. (2014). Pilot plant demonstration of CO2 capture from cement plant with advanced amine technology. Energy Procedia 63: 6464–6475.
6 6 Bjerge, L.‐M. and Brevik, P. (2014). CO2 capture in the cement industry, Norcem CO2 Capture Project (Norway). Energy Procedia 63 (1876): 6455–6463.
7 7 Hills, T.P., Sceats, M., Rennie, D., and Fennell, P. (2017). LEILAC: low cost CO2 capture for the cement and lime industries. Energy Procedia 114: 6166–6170.
8 8 Herzog, H.J. (2018). Carbon Capture. The MIT Press Essential Knowledge Series.
9 9 Fout, T., Zoelle, A., Keairns, D. et al.. Cost and Performance Baseline for Fossil Energy Plants Volume 1b: Bituminous Coal (IGCC) to Electricity. NETL‐PUB‐22638. https://netl.doe.gov/projects/files/CostAndPerformanceBaselineForFossilEnergyPlantsVol1BitumCoalAndNGtoElectBBRRev4-1_092419.pdf.
10 10 Wu, S., Kukoski, A., Jin, P. et al. Development of Oxyfuel Combustion Technology for Existing Power Plants, 1–6. Hitachi Power Systems America, Ltd www.hitachipowersystems.us.
11 11 Younas, M., Sohail, M., Kong, L.L. et al. (2016). Feasibility of CO2 adsorption by solid adsorbents: a review on low‐temperature systems. Int. J. Environ. Sci. Technol. 13 (7): 1839–1860.
12 12 Samanta, A., Zhao, A., Shimizu, G.K.H. et al. (2012). Post‐combustion CO2 capture using solid sorbents: a review. Ind. Eng. Chem. Res. 51 (4): 1438–1463.
13 13 Cherbański, R. and Molga, E. (2009). Intensification of desorption processes by use of microwaves: an overview of possible applications and industrial perspectives. Chem. Eng. Process. Process Intensif. 48 (1): 48–58.
14 14 Chronopoulos, T., Fernandez‐Diez, Y., Maroto‐Valer, M.M. et al. (2014). CO2 desorption via microwave heating for post‐combustion carbon capture. Microporous Mesoporous Mater. 197: 288–290.
15 15 Yu, C.H., Huang, C.H., and Tan, C.S. (2012). A review of CO2 capture by absorption and adsorption. Aerosol Air Qual. Res. 12 (5): 745–769.
16 16 Abanades, J.C. (2013). Chapter 21‐Calcium looping for CO2 capture in combustion systems. In: Fluidized Bed Technologies for Near‐Zero Emission Combustion and Gasification, 931–970. Woodhead Publishing Series in Energy.
17 17 Abanades, J.C., Arias, B., Lyngfelt, A. et al. (2015). Emerging CO2 capture systems. Int. J. Greenhouse Gas Control 40: 126–166.
18 18 Mores, P.L., Arias, A.M., Scenna, N.J. et al. (2019). Cost‐based comparison of multi‐stage membrane configurations for carbon capture from flue gas of power plants. Int. J. Greenhouse Gas Control 86: 177–190.
19 19 Roussanaly, S. and Anantharaman, R. (2017). Cost‐optimal CO2 capture ratio for membrane‐based capture from different CO2 sources. Chem. Eng. J. 327: 618–628.
20 20 Lockwood, T. (2016). Next‐generation carbon capture technologies for coal. IEA Clean Coal Centre, CCC/265, London, United Kingdom.
21 21 Wang, Y., Zhao, L., Otto, A. et al. (2017). A review of post‐combustion CO2 capture technologies from coal‐fired power plants. Energy Procedia 114: 650–665.
22 22 Abu‐Zahra, M.R.M., Sodiq, A., and Feron, P.H.M. (2016). Commercial Liquid Absorbent‐Based PCC Processes. Elsevier Ltd.
23 23 Xu, Z., Wang, S., Zhao, B., and Chen, C. (2013). Study on potential biphasic solvents: absorption capacity, CO2 loading and reaction rate. Energy Procedia 37: 494–498.
24 24 Gladis, A., Gundersen, M.T., Fosbøl, P.L. et al. (2017). Influence of temperature and solvent concentration on the kinetics of the enzyme carbonic anhydrase in carbon capture technology. Chem. Eng. J. 309: 772–786.
25 25 Aines, R.D., Spaddaccini, C.M., Duoss, E.B. et al. (2013). Encapsulated solvents for carbon dioxide capture. Energy Procedia 37: 219–224.
26 26 Zheng, D.‐Q., Ma, W.‐D., Wei, R., and Guo, T.‐M. (1999). Solubility study of methane, carbon dioxide and nitrogen in ethylene glycol at elevated temperatures and pressures. Fluid Phase Equilib. 155 (2): 277–286.
27 27 The DOW Chemical Company (2015). The DOW Chemical Company Product Safety Assessment SELEXOL TM Solvents. pp. 1–5.
28 28 Takahashi, S., Song, K.Y., and Kobayashi, R. (1984). Experimental vapor‐liquid equilibriums in the carbon dioxide‐diethylene glycol‐water and carbon dioxide‐triethylene glycol‐water systems at feasible absorption temperatures and pressures. J. Chem. Eng. Data 29 (1): 23–28.
29 29 Jou, F.‐Y., Otto, F.D., and Mather, A.E. (2000). Solubility of H2S and CO2 in diethylene glycol at elevated pressures. Fluid Phase Equilib. 175: 53–61.
30 30 Lin, H., Wu, T., and Lee, M. (2003). Isothermal vapor – liquid equilibria for binary mixtures of carbon dioxide with diethylene glycol (diethyl, butyl, hexyl, or dibutyl) ether at elevated pressures. Fluid Phase Equilib. 209: 131–145.
31 31 Henni, A., Tontiwachwuthikul, P., and Chakma, A. (2008). Solubilities of carbon dioxide in polyethylene glycol ethers. Can. J. Chem. Eng. 83 (2): 358–361.
32 32 Garcia, M., Knuutila, H.K., Aronu, U.E., and Gu, S. (2018). Influence of substitution of water by organic solvents in amine solutions on absorption of CO2. Int. J. Greenhouse Gas Control 78: 286–305.
33 33 Guo, C., Chen, S., Zhang, Y., and Wang, G. (2014). Solubility of CO2 in nonaqueous absorption system of 2‐(2‐aminoethylamine)ethanol + benzyl alcohol. J. Chem. Eng. Data 59: 1796–1801.
34 34 Yuan, Y. and Rochelle, G.T. (2019). Lost work: a comparison of water‐lean solvent to a second generation aqueous amine process for CO2 capture. Int. J. Greenhouse Gas Control 84: 82–90.
35 35 Le Moullec, Y., Neveux, T., Al Azki, A. et al. (2014). Process modifications for solvent‐based post‐combustion CO2 capture. Int. J. Greenhouse Gas Control 31: 96–112.
36 36 Bhattacharyya, D. and Miller, D.C. (2017). Post‐combustion CO2 capture technologies – a review of processes for solvent‐based and sorbent‐based CO2 capture. Curr. Opin. Chem. Eng. 17: 78–92.
37 37 Rochelle, G.T., Wu, Y., Chen, E. et al. (2019). Pilot plant demonstration of piperazine with the advanced flash stripper. Int. J. Greenhouse Gas Control 84: 72–81.
38 38 Song, C., Liu, Q., Ji, N. et al. (2018). Alternative pathways for efficient CO2 capture by hybrid processes – a review. Renewable Sustainable Energy Rev. 82: 215–231.
39 39 EG&G Technical Services, Inc (2004). Fuel Cell Handbook, 7e). US‐DOE NETL Under Contract No. DE‐AM26‐99FT40575.
40 40 Adams, T.A., Nease, J., Tucker, D., and Barton, P.I. (2013). Energy conversion with solid oxide fuel cell systems: a review of concepts and outlooks for the short‐ and long‐term. Ind. Eng. Chem. Res. 52 (9): 3089–3111.
41 41 Amrollahi, Z., Ystad, P.A.M., Ertesvåg, I.S., and Bolland, O. (2012). Optimized process configurations of post‐combustion CO2 capture for natural‐gas‐fired power plant – power plant efficiency analysis. Int. J. Greenhouse Gas Control 8: 1–11.
42 42 Bolland, O. (2010). Thermal Power Generation, 32. NTNU.
43 43 Adams, T. and Mac Dowell, N. (2016). Off‐design point modelling of a 420 MW CCGT power plant integrated with an amine‐based post‐combustion CO2 capture and compression process. Appl. Energy 178: 681–702.
44 44 Jordal, K., Ystad, P.A.M., Anantharaman, R. et al. (2012). Design‐point and part‐load considerations for natural gas combined cycle plants with post combustion capture. Int. J. Greenhouse Gas Control 11: 271–282.
45 45 Lucquiaud, M., Chalmers, H., and Gibbins, J. (2009). Capture‐ready supercritical coal‐fired power plants and flexible post‐combustion CO2 capture. Energy Procedia 1 (1): 1411–1418.
46 46 Pan, M., Aziz, F., Li, B. et al. (2016). Application of optimal design methodologies in retrofitting natural gas combined cycle power plants