Henley's Twentieth Century Formulas, Recipes and Processes. Various
Читать онлайн книгу.
from being deposited in layers. The alloy softens at 140° F. and melts completely at 158° F. The color is silvery white, with a luster like polished silver, and the metal can be bent, hammered, and turned. These properties would make it valuable for many purposes where a beautiful appearance is of special importance, but on account of the considerable amount of cadmium and bismuth which it contains, it is rather expensive, and therefore limited in use. Casts of small animals, insects, lizards, etc., have been prepared from it, which were equal in sharpness to the best galvanoplastic work. Plaster of Paris is poured over the animal to be cast, and after sharp drying, the animal is removed and the mold filled up with Lipowitz’s metal. The mold is placed in a vessel of water, and by heating to the boiling point the metal is melted and deposited in the finest impressions of the mold.
This alloy is most excellent for soldering tin, lead, Britannia metal, and nickel, being especially adapted to the last two metals on account of its silver-white color. But here again its costliness prevents its general use, and cheaper alloys possessing the same properties have been sought. In cases where the silver-white color and the low melting point are not of the first importance, the alloys given below may very well be used in the place of it.
II.—Cadmium alloy (melting point, 170° F.): Cadmium, 2 parts; tin, 3; lead, 11; bismuth, 16.
III.—Cadmium alloy (melting point, 167° F.): Cadmium, 10 parts; tin, 3; lead, 8; bismuth, 8.
Cadmium alloys (melting point, 203° F.):
| IV | V | VI | ||
|---|---|---|---|---|
| Cadmium | 1 | 1 | 1 | parts |
| Tin | 2 | 3 | 1 | parts |
| Bismuth | 3 | 5 | 2 | parts |
VII.—A very fusible alloy, melting at 150° F., is composed of tin, 1 or 2 parts; lead, 2 or 3; bismuth, 4 or 15; cadmium, 1 or 2.
VIII.—Wood’s alloy melts between 140° and 161.5° F. It is composed of lead, 4 parts; tin, 2; bismuth, 5 to 8; cadmium, 1 to 2. In color it resembles platinum, and is malleable to a certain extent.
IX.—Cadmium alloy (melting point, 179.5° F.): Cadmium, 1 part; lead, 6 parts; bismuth, 7. This, like the preceding, can be used for soldering in hot water.
X.—Cadmium alloy (melting point, 300° F.): Cadmium, 2 parts; tin, 4; lead, 2. This is an excellent soft solder, with a melting point about 86 degrees below that of lead and tin alone.
Cadmium Alloys With Gold, Silver, And Copper.
—I.—Gold, 750 parts; silver, 166 parts; cadmium, 84 parts. A malleable and ductile alloy of green color.
II.—Gold, 750 parts; silver, 125 parts; and cadmium, 125 parts. Malleable and ductile alloy of yellowish-green hue.
III.—Gold, 746 parts; silver, 114 parts; copper, 97 parts; and cadmium, 43 parts. Likewise a malleable and ductile alloy of a peculiar green shade. All these alloys are suitable for plating. As regards their production, each must be carefully melted together from its ingredients in a covered crucible lined with coal dust, or in a graphite crucible. Next, the alloy has to be remelted in a graphite crucible with charcoal (or rosin powder) and borax. If, in spite thereof, a considerable portion of the cadmium should have evaporated, the alloy must be re-fused once more with an addition of cadmium.
Alloys For Casting Coins, Medallions, Etc.
Alloys which fulfill the requirements of the medalist, and capable, therefore, of reproducing all details, are the following:
| I | II | ||
|---|---|---|---|
| Tin | 3 | 6 | parts |
| Lead | 13 | 8 | parts |
| Bismuth | 6 | 14 | parts |
III.—A soft alloy suitable to take impressions of woodcuts, coins, metals, engravings, etc., and which must melt at a low degree of heat, is made out of bismuth, 3 parts; tin, 1 1/2 parts; lead, 2 1/2 parts; and worn-out type, 1 part.
Acid-proof Alloy.
—This alloy is characterized by its power of resisting the action of acids, and is therefore especially adapted to making cocks, pipes, etc., which are to come in contact with acid fluids. It is composed of copper, zinc, lead, tin, iron, nickel, cobalt, and antimony, in the following proportions:
| Copper | 74.75 parts |
| Zinc | 0.61 parts |
| Lead | 16.35 parts |
| Tin | 0.91 parts |
| Iron | 0.43 parts |
| Nickel or Cobalt | 0.24 parts |
| Antimony | 6.78 parts |
{63}
Albata Metal.
—Copper, 40 parts; zinc, 32 parts; and nickel, 8 parts.
Alfenide Metal.
—Copper, 60 parts; zinc, 30; nickel, 10; traces of iron.
Bath Metal.
—This alloy is used especially in England for the manufacture of teapots, and is very popular owing to the fine white color it possesses. It takes a high polish, and articles made from this alloy acquire in the course of time, upon only being rubbed with a white cloth, a permanent silver luster. The composition of Bath metal is copper, 55 parts; zinc, 45 parts.
Baudoin Metal.
—This is composed of 72 parts of copper, 16.6 of nickel, 1.8 of cobalt, 1 of zinc; 1/2 per cent of aluminum may be added.
Casting Copper:
Macht’s Yellow Metal.
—I.—This alloy consists of 33 parts of copper and 25 of zinc. It has a dark golden-yellow color, great tenacity, and can be forged at a red heat, properties which make it especially suitable for fine castings.
II.—Yellow.—Copper, 67 to 70 parts; zinc, 33 to 30 parts.
III.—Red.—Copper, 82 parts; zinc, 18 parts.
Copper Arsenic.
—Arsenic imparts to copper a very fine white color, and makes